Navigator Accessible Pedestrian Signal

SPECIFICATIONS

The Navigator is an Accessible Pedstrian Signal (APS) that provides both a vibrating arrow button and audible sounds during the WALK interval. During the PED clearance and DON'T WALK interval a locating tone is available.

Sounds are emitted from the back of the unit. The weather-proof speaker is mounted behind a face plate with a vandal resistant screen. A sunlight visible LED confirms the button has been pushed.

• Pole Unit Speaker: 8Ω, 15W, weatherproof
• Pole Unit Temperature Range: -40°F to 165°F (-40°C to 60°C)
• Pole Unit Frame: Cast aluminum, chem filmed, powder coated
• LED Operation: The LED lights when the button is pushed and remains lit until the next walk phase.
• LED Luminous Intensity: Greater than 1200 mcd, sunlight visible, ultra bright red, viewing angle 160°.
• Operating and Storage: -34°C to 60° 0-100% Humidity
• Face Plate: Aluminum, powder coated, ink marking.
• Pole Unit Push Button: ADA compliant, Cast aluminum, nickel plated, powder coated.

• General Environmental: Operating and Storage: -34°C to 74°C 0-100% Humidity Non-Condensing.
• Line Power: 25W-75W Typical, 120W Peak with eight Push Button Stations.
• Ped Walk/Don't Walk Inputs: Optically Isolated 36 Volts AC/DC Peak
• General Purpose Outputs & Ped Outputs: Optically Isolated 36 Volts AC/DC Peak, .3A Solid State Fused Contact Closure
• Fault Output: Normally Open and Closed Relay Contacts 125 Volts AC/DC 1A Max
• A, B, C, D, PBS Power Outputs: Nominal 22 Volts DC, Short Circuit Protected - Auto Recovering
• General Purpose Inputs: 10-36 Volts AC/DC Peak, 10mA Max

• Audio Amplifier Power Output: 10W RMS into 8Ω
• Volume Control Automatic Adjustment Range: 28dB MAX
• Microphone for Ambient Noise: Approximate frequency range: 170Hz to 2.3kHz
• Button Tone: A brief "tick" confirms each button push.
• Audible Locating Tone: 880Hz plus harmonic, 0.1 second duration, 1 second interval. Operates during ped clearance and don't walk interval.
• Audible Chirp Sound: From 2700Hz to 1700Hz., .2 second duration, 1 second interval, on only during walk intervals.
• Audible Cuckoo Sound: 1250Hz and 1000 Hz., .6 second duration, 1.8 second interval, on only during walk intervals.